If you're replacing a fence on flat terrain with a straight, clearly marked boundary, the job will be relatively simple. If you need to define the boundary yourself or are installing the fence on uneven ground, it can be more difficult. Digging holes two feet deep is hard work. There will be roots and stones. It is especially difficult if there is an old piece of concrete in the ground for an old wooden pole that has rotted, and professionals leave it and dig new holes between the old pieces to avoid this work.
Fences erected by builders are particularly prone to large chunks of concrete, but are often too shallow. This is so difficult that I decided not to use wooden poles again, only concrete. Wooden posts rot and spikes break off at ground level, where the moisture and air content is optimal. A concrete pole is very heavy, although two sturdy people can handle it.
The same goes for concrete gravel boards, which I also recommend for the same reason. It's good to leave a hole in the shape of a hedgehog, perhaps at the end of the track, or leave out one of the gravel boards. You can get a special alcohol level accessory that attaches to the pole. As a beginner, place the first one, place it perfectly upright, cover it with pieces of brick or concrete while you mix it with a shovel, make sure it stays perfectly upright and that nothing happens to move it for at least a day. To avoid seeing a large expanse of lumpy concrete above the ground, you can make a simple box with shutters around the base of the pole at ground level so that the top few inches are small and tidy.
Then you can dig the next hole and, when you have done it, you have taken out the pole and taken a break to drink tea, the concrete in the first hole will have hardened, although it will not have strength, so you can wait until the next day before placing the gravel board and the fence panel and placing the next post against them (not so tight as not to be able to put a new one in from above when necessary). If you're an amateur, I'll be happy to make just one post a day so you can be sure that you won't let go of the old post on its concrete before it has time to harden. Otherwise, do them fast enough so that the concrete remains fluid and you can crush it again if it moves. On a windy day, the panels will rock the posts and release them to form soft concrete. If you're going to work fast, you need each hole ready before you start assembling the previous post.
This will require about three people. A straight-sided hole the shape and width of a bucket is better than a large, wide crater. Installing a wooden fence is difficult. It involves a lot of planning, measuring and manual work to dig holes and cut fence posts. Installing the fence on a slope or rocky terrain can increase complexity. Consider hiring a professional to install your wooden fence.
Installing a fence yourself is not without problems. While you can save on the monetary labor costs that a company would have, you will spend your time installing the fence. Keep in mind that most fence installers have teams of several people, which helps speed up the process. If it's just you and a friend or two, you could be facing a few hours of hard work.
Go into the fence installation process yourself. While technically, just about any fence can be installed on your own without the need for professional equipment, some fences are easier than others. The installation of the fence is not easy and always requires at least 2 people, but it can be done if you really want to save a couple of hundred dollars. The cost depends on the material, the type of fence and the type of installation you want to do. Let's talk about the easiest ones.
While it's necessary to have a slightly larger budget than buying fence materials alone, most professionals who install fences aren't going to cost an arm and a leg. It's worth the extra money to have peace of mind knowing that your fence is safe, sturdy, and properly installed the first time. The short answer is yes, if done correctly. By installing a fence yourself, you'll save money on installation costs and company hiring fees.
However, if you install a fence incorrectly, you may have to spend more money on repairing it. In addition, installing a fence yourself will take up a lot of time, professional teams have a lot of people, which speeds up the process. Use a trowel to create a gentle slope in the postcretum so that rainwater escapes from the fence post on all sides. If you have no experience with this type of thing, are short on time and want a team of professionals to install a fence quickly, consider hiring someone to do it for you. A couple of friends of mine have told me good things about EZ Fence 2 Go, so if you're a somewhat skilled person, I recommend this approach.
As a general rule, you don't need permission to install a fence, as long as it doesn't invade other properties and complies with guidelines established by municipal ordinances. The difficulty of installing the fence depends primarily on the type of fence, its size, the terrain, and how long you want it to last. Choose a wood sealant or stain that is appropriate for your type of fence and the look you want to achieve. In addition, when you start digging each hole for posts, make sure they are all the same depth and width; this will ensure uniformity during installation.
One of the advantages of installing a fence on your own is that you don't have to pay a company for labor costs. Make sure that the holes are deep enough to provide adequate support to the fence, taking into account the height and weight of the materials. As a homeowner, you already know how a fence can add privacy and security to your property, define property boundaries, improve the look of your yard, and even increase the value of your home. For example, if the fence posts measure eight feet, the depth should be between 2 and 4 feet in the ground.
The three steps to preparing your yard for fence installation are identifying the property boundary, cleaning your yard, even removing decorations, and marking locations. And when you're ready, grab your tools and get ready to begin your DIY project to build a fence that will stand the test of time and improve the look of your property.
